5 Reasons Why Submersible Pumps Get Stuck in Borewells (And How Professionals Fix It)
A submersible pump is the heart of your water system. However, in cities like Hyderabad and Secunderabad, where many borewells are deep, it is common for motors to become stuck or jammed over time. If your borewell pump is stuck, understanding the cause is the first step toward a safe and successful recovery.
1. Sand Lock (Silt Accumulation)
This is one of the most common causes of stuck pumps in areas around Medak, Sangareddy, and Patancheru. Sand and fine mud can settle around the pump over time and lock the motor in place.
- Professional Fix: Technicians use a gentle agitation method combined with high-pressure air flushing to loosen the sand before lifting the pump.
2. Pipe Deflection (Pipe Bending)
In deep borewells (often above 500 ft), the weight of the pipes and water can cause low-quality PVC pipes to bend inside the casing, pressing the pump against the borewell wall.
- Professional Fix: Using a tripod chain pulley lifting system, technicians maintain a vertical pull to slowly straighten the pipe while lifting.
3. Cable Wedging
If the electrical cable is not properly secured to the pipe during installation, it may sag and create loops. These loops can become wedged between the pump and the borewell casing.
- Professional Fix: Professionals carefully lift the pump and free the cable using special pipe gripping tools to prevent cable damage.
4. Corrosion & Hard Water Scaling
Areas such as Gachibowli, Manikonda, Kondapur, and Madhapur often have high mineral content in groundwater. Over time, minerals form scale deposits on pipes, increasing their diameter and causing them to jam inside the borewell casing.
- Professional Fix: Technicians may use descaling treatments followed by controlled hydraulic lifting to safely remove the pump.
5. Borewell Casing Collapse
This is a serious situation where the outer casing pipe cracks or collapses due to soil pressure or aging. When this happens, the pump becomes tightly trapped inside the borewell.
- Professional Fix: Experts use specialized borewell fishing tools to retrieve the pump even if the casing is damaged.
⚠️ The "Tractor Pull" Mistake
Some local workers try to remove stuck pumps using tractors or JCB machines. This is very dangerous. The uncontrolled force can snap the pipe, causing the pump to fall deeper into the borewell, making recovery extremely expensive.
Professional Borewell Pump Removal Service Areas
Deans Submersible & Stuck-Up Pump Repair provides fast service across Hyderabad, Secunderabad, and surrounding areas.
Borewell Pump Repair Service Areas in Hyderabad
We provide 24/7 emergency borewell repair, stuck motor extraction, and pump removal services across Hyderabad, Secunderabad, and surrounding districts.
- Kukatpally
- Miyapur
- Bachupally
- Nizampet
- Pragathi Nagar
- Chandanagar
- Lingampally
- Gachibowli
- Kondapur
- Madhapur
- Hitech City
- Manikonda
- Mehdipatnam
- Tolichowki
- Attapur
- Rajendranagar
- Shamshabad
- LB Nagar
- Dilsukhnagar
- Nagole
- Uppal
- Tarnaka
- Habsiguda
- ECIL
- Kapra
- Alwal
- Bowenpally
- Kompally
- Suchitra
- Jeedimetla
- Quthbullapur
- Medchal
- Shamirpet
- Ghatkesar
- Hayathnagar
- Ibrahimpatnam
- Shadnagar